Dux FARUK HEADBOARD Instruções de montagem - Página 3

Procurar online ou descarregar pdf Instruções de montagem para Mobiliário de interior Dux FARUK HEADBOARD. Dux FARUK HEADBOARD 3 páginas.

Imprimir página
III. MOUNT THE HEADBOARD
Lift the headboard and align the brackets
on the headboard over the brackets on
the bed and slide the brackets together.
IV. CONNECT THE ELECTRIC MOTOR
Connect the electric motor to the control
unit. Be sure to connect the electric motor
to the upper hole on the control unit.
Do not plug it to the outlet.
V. CONNECT THE REMOTE CONTROL
A Connect the remote control to
the control unit.
2
DUX, DUXIANA and DUX Pascal-systems are registered trademark owed by Dux Design AB 2012.
Printed 2021.02.01
B Plug the electric motor unit into the outlet.
POWER RESERVE
The control unit comes with a 9V battery.
The battery is used to lower the head
board to original flat position in the case
of a power failure.
NOTE: The headboard cannot be raised
with only battery power.
REMOVING THE HEADBOARD
To remove the headboard from the bed,
insert a screwdriver into the slot
at the bottom of the brackets on the bed
and pry upwards until loosened.
dux.com
dux.com
DUX, DUXIANA and DUX Pascal-systems are registered trademark owed by Dux Design AB 2012.
Printed 2021.02.01
3