Datasheen KvmSwitch! CS16C Manual do utilizador - Página 4
Procurar online ou descarregar pdf Manual do utilizador para Interruptor Datasheen KvmSwitch! CS16C. Datasheen KvmSwitch! CS16C 8 páginas. Usb & ps/2 auto kvm switch
Imprimir página
☞
E. If cursor
selects the PC which is remarked with " ò" means that the PC is daisy-
chained to the SLAVE. Hit <ENTER> or
shows the selected daisy-chained PC information (see Figure(5)). On the right side of
Line 1 of Figure(5) shows "SLAVER:??" to identity the on screen information is from??
Port of SALVER.
E. Shown SLAVE PC information as Figure(5), press
(shown as Figure(4)).
F. Press <ESC> key to come back to MAIN MENU (Shown Figure(1)).
6. <F3> key SEARCH PC function
A. On MAIN MENU screen mode, press <F3> to enter into PC NAME input mode to
search for the target PC, OSD message shown as FIGURE(6).
B. Input at most 16 characters ( <A~Z>, numerical <0~9> and <-> etc) and press
<ENTER> as confirmation. For example: input <PC12345> and hit <ENTER> to start
searching the target PC <PC12345>. When targeted PC is found, it will switch to the PC
autocratically.
C. If no PC NAME is matched, the OSD will display "ERROR" message (shown as
Figure(7)).
5
⊕
to enter into the cascaded SLAVE. OSD
to return to the MASTER PC
CS08S/ CS16C 8/16 PORT KVM SWITCH
D. If the searched PC is powered off, the OSD will display "DISABLE" message
(shown as Figure(8)).
7. <F4> key EDIT PC NAME function
A. Under MAIN MENU mode: hit <F4> key to enter the edit PC name operation
(shown as Figure(9)), on the Line 1 of Figure(9) show PC : 2 indicating the current
screen information is from the second PC.
B. Under OSD mode: on the right side of (STU) field show the status of PC:
+ : PC is POWER ON;
+ 8: PC is daisy-chained to 8 port model series which have MASTER / SLAVE
Configuration.
C. use
or
key to move the cursor
PC name operation (shown as Figure(10)).
☞
D. In Figure(10) the cursor
indicates to edit the name of PC2. the cursor becomes
the icon
prompt to indicate the location you are editing. Input at most 16 characters
(<A~Z>, numerical <0~9> and <-> etc) and press <ENTER> as confirmation.
E. Edit SLAVE PC name: use
,
→
SLAVE. Then press < > to select the daisy-chained SLAVE PC, the OSD screen shows
as Figure (11): the right side of Line 1 shows "SLAVER:3" indicating the current screen
display is from ?? SLAVE.
☞
(CURSOR), hit <ENTER> to enter the edit
, <Page Up>, <Page Down> to select the PC of
CS08S/ CS16C 8/16 PORT KVM SWITCH
6