Dvent AW870 Manual de instruções de instalação e funcionamento - Página 3
Procurar online ou descarregar pdf Manual de instruções de instalação e funcionamento para Altifalantes Dvent AW870. Dvent AW870 6 páginas. 900 mhz wireless stereo speakers
Imprimir páginaCO N N E CT TH E
Connect the transmitter as follows:
P o w e r
Step 1
t h e w
1. Insert the power cord from AC Adapter (0) into the
Transmitter Power Input Jack (I).
2. Plug the AC adapter into a nearby, standard wall
outlet.
Note: Be sure
to use the AC adapter rated
Step 2 Connect to an Audio Source
WARNING: DO NOT connect the Dual RCA cables to a
speaker oufpufon the audio source. If you use the
speaker output of an audio source to connect the
transmitter, you willpermanently damage the
line/variable outputs or headphone outputs only.
OPTION 1 C
S
ONNECTING TO A
TEREO
1. Connect one end of the color-coded Dual
RCA Cable (R) to the color-coded Left/Right
Audio Input Jacks (L, M) on the transmitter.
2. Connect the other end of the Dual RCA
Cable to the RCA-type audio outputs of a
stereo receiver/ amp or other audio source.
OPTION 2 C
T
ONNECTING TO A
ELEVISION
1. Connect one end of the color-coded Dual
RCA Cable (R) to the color-coded Left/Right
Audio Input Jacks (L, M) on the transmitter.
2. Connect the other end of the Dual RCA Cable
to the RCA-type audio outputs of a TV.
OPTION 3 C
H
ONNECTING TO A
EADPHONE
1. Connect one end of the color-coded Dual RCA
Cable (R) to the color-coded Left/Right Audio
Input Jacks (L, M) on the transmitter.
2. Connect the other end of the Dual RCA Cable to
the color-coded " Y" Cable Adapter(S).
Transmitter Power
R
ECEIVER
Input Jacks (1, M)
Input Jacks (1 M)
J
ACK
Audio
Input Jacks (L M/
Cable (R)
5
Smarthome.com, Inc. (800) SMART-HOME (949) 221-9200 http://smarthome.com
3. Plug the 3.5mm mini plug from the " Y" Cable Adapter into the headphone jack
(as needed, use the Headphone Adapter Plug (Cl) to convert the 3.5mm plug to a
Note:
fixed or valiable, depending on your equipment
A
F
-L
BOUT
IXED
A fixed-level, or line level audio output is considered ideal since it provides an
audio signal unchanged by adjustments to the audio source (stereo, etc.) volume
control.
Adapter (0)
Hint:
Fixed-level audio outputs from stereo receivers/amps will typically be designated
as Tape, Tape I, and Tape 2 outputs, OAT (digital audio tape) outputs, VCR audio
output connections, and auxiliary audio outputs. Tape, Tape
outputs are usually marked as
RECORD.' Jacks designated for phono, CD,
inputs and will not work for purposes of installing the transmitter.
Fixed-level outputs from TVs are usually marked as ' Constant,' ' Fixed,' or ' Select.'
If they are not marked as such, they are probably variable outputs (see "About
Variable-Level Outputs, " next page).
-
-
Outputs from VCRs are almost always fixed.
Hint:
When connecting to the fixed audio outputs of a VCR, remember that for the
wireless system to work, the VCR must be active. In other words, turn the TV on
to the channel you would normally use to watch a videotape (channel 3 or
the VCR on, then press the
make the VCR the controlling piece of equipment. At this point, you can watch TV
or a VHS tape through the VCR.
through the VCR. This configuration gives you independent volume control
through your TV (using the TV remote control) and at the speakers.
If your VCR (or other RCA-type audio source you are connecting to) is mono (a
single audio output), you need to acquire an RCA
cable included in this kit. It will have a single male RCA plug and 2 female RCA
jacks. Attach the dual RCA cables from the transmitter to the 2 female RCA jacks
on the ' 7"' cable, then connect the single male RCA plug of the "Y" cable to the
single audio output of the VCR.
A
V
BOUT
ARIABLE
A variable-level output, such as a headphone jack, provides an audio signal to the
transmitter that changes in relation to volume adjustments on the audio source. As
the volume of the audio source goes up and down, so too does the audio signal
strength sent to the transmitter. This can affect the quality of sound you hear at the
Adapter IS)
speakers.
O
EVEL
UTPUTS
' TAPE OUTPUT,' ' TAPE OU7;' ' TAPE REC,' OR ' TAPE
When changing TV channels, remember to do so
-L
O
EVEL
UTPUTS
6