Dvent AW870 Manual de instruções de instalação e funcionamento - Página 4

Procurar online ou descarregar pdf Manual de instruções de instalação e funcionamento para Altifalantes Dvent AW870. Dvent AW870 6 páginas. 900 mhz wireless stereo speakers

Imprimir página
On most bookshelf-type or compact stereo systems, inserting a headphone
into the headphone jack results in automatic cutoff of the regular, or hard-wired,
speakers.
/fin t:
Most TVs, regardless of age or price, have variable outputs. If you are unsure
which, if any of your outputs is fixed, refer to the TV instruction manual. Some
TVs have outputs that can switch between variable and fixed. Refer to the TV
instruction manual. When given a choice, fixed is a/ways recommended.

POWER THE SPEAKERS

Select from the following options to power the
C
P
O
1
AC
OWER
PTION
ONNECT THE
Turn the speaker Power On-Off/Volume
Control Wheel (D) to the " OFF" position (atl
the way counterclockwise).
Inset-t the power cord from the AC adapter
(P) into the Speaker Power Input Jack (F).
Plug the AC adapter into any standard wall
outlet.
Repeat for other speaker.
Note: Be sure to use the AC adapters rated 15V DC
800 mA.
P
O
2
I
OWER
PTION
NSERT
ELL
Remove the four screws holding the battery
compartment cover(E).
Inset-t eight (8) " C" batteries (optional) into the
speaker following the polarity (" t" and
diagrammed in the battery compartment.
Replace the battery compartment cover and
rews.
SC
Repeat for other speaker.

ADJUST THE TRANSMITTER

Adjust the transmitter as follows:
STEP 1
T
ON
A
S
URN
YOUR
UDIO
OURCE
1. Turn ON your audio source (i.e. Stereo Receiver, TV, etc.) so that you can hear
sound coming from the source.
A
DAPTER
7
Smarthome.com, Inc. (800) SMART-HOME (949) 221-9200 http://smarthome.com
STEP 2
S
ET THE
Set the Frequency Control Wheel (N) to
Turn the Output Level Control wheel (K) all the way to
the right as shown.
Check status df Audio Level Indicator Light (H). If it
flickers intermittently (about half the time), proceed to

" Tune the Speakers" .

If Audio Level Indicator Light is on solid red or flickering
very rapidly, turn wheel slowly back to the left until light
flickers intermittently.
Note: If the light does not flicker, confirm secure connection
of the AC adapter: If the light still does not flicker,
confirm secure connection to the audio source output.
Control Wheel completely to the right /as shown) and proceed.
Hint: If the transmitter is connected to a variable output (i.e. Headphone Jack, TV audio
leave
out) on the audio source,
(as
to the right
shown) and adiust the volume on the audio source UR or down as
TUNE THE SPEAKERS
Adjust the speakers as follows:
T
O
T
S
URN
N AND
UNE THE
PEAKERS
1. Use the speaker Power ON-OFF/Volume Control Wheel (D)
to turn the speaker " ON." Tuning Indicator Light (A) will
illuminate red.
2. Turn the Tuning Control Wheel (B) until the audio source
is heard. The Tuning Indicator Light (A) will change
color to green, indicating the speaker is tuned to the
signal from the transmitter.
3. Adjust
as desired.
volume
Set the LeftlMonolRight
Switch (C) accordingly (see
4.
" Setting the Speakers for Stereo/Monaural
Operation" on page 9).
5. Repeat process for other speaker.
Note: Interference in the form of static and/or
distortion can sometimes be heard. If this
confirm correct transmitter/speaker adjustments and
occurs,
indicators. If the problem persists, refer to TROUBLESHOOTING.
"
EVEL
Audio Level
Indicator Light (H}
Output Level
Control
Wheel (K/
the Output Level Control Wheel turned
Tuning Indicator
Light
Power On-Uffn/olume
Control Wheel (0)
Turn to
Right
Frequency
Control
Wheel (NI
a// the
way