Austin Kontore Leopold Bench Kit Manual de montagem - Página 5

Procurar online ou descarregar pdf Manual de montagem para Armazenamento de ferramentas Austin Kontore Leopold Bench Kit. Austin Kontore Leopold Bench Kit 12 páginas. Children's version

Imprimir página

Leg Assemblies

(2) 24" 2x8 Pine

Angled 22° cuts

Front Legs

(2) 11 ½" 2x8 Pine

Angled 22° cuts

Rear Legs

(6) 2 ½" Screws

Exterior Wood Glue

A complete leg is an assembly consisting of a Front Leg (24" angled) and Rear leg (11 ½" angled).

You will need a straight edge to help align the legs. An

easy way to do this is to stack the lumber which makes the

Seat and Back on top of each other, then clamp them to a

work bench.

Another option, if you are working on the floor, would be

butt them against a wall. You can also tip the Back on its

edge and use it (shown in this photo).

Next, lay the two Front Legs on the large flat work surface;

with the bottoms against the straight edge. They should

be making a big triangle-like shape, with the bottoms of

the legs flat against the guide/wall/straightedge.

Important: Make sure to do this on a big smooth

surface, like a large work bench.

Note: You are building the legs on their sides, to make

them easier to assemble.

Put the (2) 11 ½" Rear Leg pieces on top of the Front Legs.

Note: Alignment of the Rear Legs will be easier if you

slip a piece of scrap 2-by material under the ends of the

Rear Legs, as shown in the photo.

Page 5 of 12