Austin Kontore Leopold Bench Kit Manual de montagem - Página 7
Procurar online ou descarregar pdf Manual de montagem para Armazenamento de ferramentas Austin Kontore Leopold Bench Kit. Austin Kontore Leopold Bench Kit 12 páginas. Children's version
Imprimir páginaUsing a 1/8" drill bit, drill (3) holes on each leg assembly.
REPEAT for both leg assemblies.
Important: Only drill a hole about 2" deep – you don't
want to drill all the way through the Front Leg.
Three (3) 2 ½" deck screws hold the Rear Leg to the Front
Leg. You'll need (6) screws in total to make the two leg
assemblies.
Using your screwdriver, fasten the Rear Leg to the Front
Leg with (3) screws.
Important: Make sure the angles look right, that the
"feet" of the legs are flat against your straight edge, and
that both finished leg assemblies are mirrors of each
other.
Once the legs are screwed together, you can test them by
standing them up. They may tip a bit, but the bottom
("feet") of the leg assemblies should be flat against the
floor, and the Rear Legs should be mounted at the same
height as each other.
© 2009 Austin Kontore LLC
REPEAT for both leg assemblies.
Page 7 of 12