4smarts Voltbeam Sensor 2 Manual - Página 4

Procurar online ou descarregar pdf Manual para Carregador de bateria 4smarts Voltbeam Sensor 2. 4smarts Voltbeam Sensor 2 6 páginas. With automatic grab motor

Imprimir página

I. Safety instructions

- Protect the device from dirt, moisture, overheating,

and extreme temperatures and only use it in dry

rooms.

- Do not open the device. Stop using the device if it

becomes damaged.

- Never use force when plugging in the device and the

adapter (if used).

- Do not drop the product and do not expose it to any

major shocks.

- When stored over a long period of time, batteries

should be charged regularly (at least every three

months).

- This product is no toy, and should not be given to

children.

- Do not connect defective devices such as USB

cables to this product.

- Take care that safety relevant components or your

view on the road do not get blocked by electronic

components.

- Always keep the road traffic regulations of the

related country in mind during use.

II. Scope of delivery

- Charging cable

- Charging station

- Air vent mount

- Suction cup mount

III. Technical specifications

- Input USB: 9V/1.67A; 9V/1.34A

- Output: 10W/7.5W

- Capacity: 250mAh

- Battery type: Li-Ion

- Connector: USB Type-C

- Operating temperature: -10°-60°

- Maximum charging distance: 6mm

IV. Picture description

1. Touch button

2. Motion sensor

3. Air vent mount

4. LED Indicator

(for power)

5. Charging Cable

6. Suction cup mount

V. Operation

- Rotate the nut anticlockwise from the screw thread

(A).

- Push the mount through the nut (B).

- Tightly screw the nut together with the mount to the

screw thread (C).

- Strongly press to the opening button and to mount it

to the air vent (D).

- Connect the plug of the supplied cable with the

related charging connector (E).

- Connect the other side of the cable with a suitable

source of energy. Always consider the mentioned

7. On / off switch

8. Motorised holding brackets

9. Charging zone

10.

LED Indicator

(wireless charge)

11.

USB Type-C connector

voltage and power information on your devices in

this step (F).

- Press the On-/Off-button to switch on the device (G).

- Press the touch button to open the holding brackets.

(H).

- Put the smartphone on as described (I).

- Press the touch button to remove the smartphone

from the holding brackets (J).

VI. Function notes

The holding brackets will close automatically after 5

minutes in extended position (K).

VII. Troubleshooting

- The device doesn't charge properly:

• Make sure that the maximum charging distance

that is stated in the technical specifications is

not exceeded. If necessary, remove cases or

other objects from the smartphone that might

be too thick.

• Check if the operation temperature is within the

range as specified in the technical specifications.

• Restart the device in case of an error by pressing

the On-/Off button (L).

- The device charges slowly:

• Use a charger that supports fast charging like

e.g. Qualcomm Quick Charge, Power Delivery or

Samsung Adaptive Fast Charge (sold separately).

• Check if the used smartphone is compatible to

wireless fast charging.

VIII. Care and Maintenance

Only use a soft, dry cloth to clean the device.

IX. Warranty

The 4smarts GmbH assumes no liability and provides

no warranty for damage resulting from improper

installation or mounting, improper use of the product

or from failure to observe the operating instructions

and/or safety notes.

X. Disposal notification

Electric and electronic devices as well as bat-

teries must not be disposed of with household

waste. Consumers are obliged by law to return

electric and electronic devices as well as batteries at

the end of their service lives to the public collecting

points set up for this purpose or point of sale.

XI. Service and support

If the product is defective or in case of problems

during installation, please consult your dealer or the

4smarts product consulting via:

http://www.4smarts.com/contact