4tronix Ultimate Initio kit Manual - Página 2

Procurar online ou descarregar pdf Manual para Robótica 4tronix Ultimate Initio kit. 4tronix Ultimate Initio kit 11 páginas. For raspberry pi

1. Fitting the Pirocon to the Raspberry Pi

Screw the support pillar to the underneath of the Pirocon. The position shown above is

suitable for a Raspberry Pi Model B+, Model A+ or Raspberry Pi 2 Model B

Use the hole in the centre if using a Model A or Model B

Push the Pirocon carefully onto the GPIO pins of the Raspberry Pi, ensuring the pins are

placed correctly as shown in the photo above

Connect the motor wires as shown. Red - Black - Black - Red