Dymo 5500 Manual do utilizador - Página 5
Procurar online ou descarregar pdf Manual do utilizador para Fabricante de etiquetas Dymo 5500. Dymo 5500 5 páginas. Electronic labelmaker
Imprimir página
• To edit a barcode, press
characters only will be displayed and the barcode
symbol
will appear in the display.
1234
• Press
or
+
label.
On a single line label, a bar code can be mixed with text
which is small, medium or large size:
123
ABC
ABC
1 2 3
A two-line label always has small size text when it is
mixed with a barcode.
Text entered before pressing
BARCODE
, will result in text above the barcode:
SYMBOL
Entering the text after pressing
barcode will produce text below the barcode:
Text can be underlined, eg:
DYMO 5500
123
ABC
DEF
1 2 3
A box can be added around the complete label:
ABC
DYMO 5500
BARCODE
+
; the barcode
SYMBOL
BARCODE
again to return to the
SYMBOL
123
123
ABC
1 2 3
followed by
ABC
ABC
1 2 3
at the end of a
ABC
1 2 3
ABC
or
123
ABC
DEF
1 2 3
DYMO 5500
123
DEF
1 2 3
Cleaning
• Clean the cutter blade regularly: Remove the
cassette, then press and hold down cutter lever
to expose cutter blade
and alcohol to clean both sides of the blade. Release
cutter lever
• Check and clean print head face
cotton bud and alcohol ONLY.
1 2 3
Troubleshooting
No display
• check machine is on
• replace discharged batteries
+
• check AC adaptor.
No printing or poor text
• replace discharged batteries
• check tape cassette installed correctly
• clean the print head
• replace the tape cassette.
Tape jammed
• lift out tape cassette carefully
• remove/release jammed tape
• DO NOT cut the ink ribbon – turn spool
tighten
• cut off excess label tape
• refit/replace the tape cassette.
Poor cutter performance
• clean the cutter blade regularly
Poor tab cuts
• replace tab cutter blade
locate and pull hard upwards to remove the cutter
block.
WARNING – the blade is extremely sharp!
No response to print key
• !!!!!!!! in the display indicates a printer jam. Press
any key to return to normal display. Open the
cassette compartment and free the jam.
•
discharged batteries. Press any key to return to
normal display. Replace the batteries.
No success?
• Call the customer service telephone number in your
country – see the warranty booklet.
In the USA, call 800-645-6051
In Canada, call (905) 670-2222
6
D
, then use a cotton bud
D
.
D
F
– remove door
flashing in the display indicates
D
regularly using a
B
to
F
then