Dymo 5500 Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Виробник етикеток Dymo 5500. Dymo 5500 5 сторінок. Electronic labelmaker

Dymo 5500 Посібник користувача
• To edit a barcode, press
characters only will be displayed and the barcode
symbol
will appear in the display.
1234
• Press
or
+
label.
On a single line label, a bar code can be mixed with text
which is small, medium or large size:
123
ABC
ABC
1 2 3
A two-line label always has small size text when it is
mixed with a barcode.
Text entered before pressing
BARCODE
, will result in text above the barcode:
SYMBOL
Entering the text after pressing
barcode will produce text below the barcode:
Text can be underlined, eg:
DYMO 5500
123
ABC
DEF
1 2 3
A box can be added around the complete label:
ABC
DYMO 5500
BARCODE
+
; the barcode
SYMBOL
BARCODE
again to return to the
SYMBOL
123
123
ABC
1 2 3
followed by
ABC
ABC
1 2 3
at the end of a
ABC
1 2 3
ABC
or
123
ABC
DEF
1 2 3
DYMO 5500
123
DEF
1 2 3

Cleaning

• Clean the cutter blade regularly: Remove the
cassette, then press and hold down cutter lever
to expose cutter blade
and alcohol to clean both sides of the blade. Release
cutter lever
• Check and clean print head face
cotton bud and alcohol ONLY.
1 2 3

Troubleshooting

No display
• check machine is on
• replace discharged batteries
+
• check AC adaptor.
No printing or poor text
• replace discharged batteries
• check tape cassette installed correctly
• clean the print head
• replace the tape cassette.
Tape jammed
• lift out tape cassette carefully
• remove/release jammed tape
• DO NOT cut the ink ribbon – turn spool
tighten
• cut off excess label tape
• refit/replace the tape cassette.
Poor cutter performance
• clean the cutter blade regularly
Poor tab cuts
• replace tab cutter blade
locate and pull hard upwards to remove the cutter
block.
WARNING – the blade is extremely sharp!
No response to print key
• !!!!!!!! in the display indicates a printer jam. Press
any key to return to normal display. Open the
cassette compartment and free the jam.
discharged batteries. Press any key to return to
normal display. Replace the batteries.
No success?
• Call the customer service telephone number in your
country – see the warranty booklet.
In the USA, call 800-645-6051
In Canada, call (905) 670-2222
6
D
, then use a cotton bud
D
.
D
F
– remove door
flashing in the display indicates
D
regularly using a
B
to
F
then