HHO Plus CCPWM60A Manual de instalação - Página 8

Procurar online ou descarregar pdf Manual de instalação para Acessórios para automóveis HHO Plus CCPWM60A. HHO Plus CCPWM60A 10 páginas. Hho hydrogen on demand dual fuel generator systems
Também para HHO Plus CCPWM60A: Manual de instalação (11 páginas), Manual de instalação (12 páginas), Manual de instalação (10 páginas)

Imprimir página

Amperage

The Maximum Current Panel will appear for you to set the amperage value you wish to work:

Minimum 1 A / Maximum 60A

1. If you press the left button (Edit) you will enter the editing mode. A yellow cursor will appear marking

the editing value;

2. Use the left button (UP) again to move up the value;

3. Press the right button (Next) to change the yellow cursor position;

4. Repeat points 2. And 3. to continue editing. After, in the right button, Exit/Save will appear:

a. If you make one single click on the right button you will exit configuration panel (Exit);

b. If you click and hold right button for 3 seconds you will Save your configuration. A message Saved

will appear.

5. Press right button (Next) to move to Maximum Voltage Panel

Maximum Voltage

For security reasons (ex: charging the battery) above 15,5V the CCPWM will not work and a blue light will

appear.

HHO Plus, Alternative Energies, Lta – Travessa das Serras 33, Vieira de Leiria, Portugal – Tel. 00351244697116 – Email: [email protected]

The Maximum Voltage Panel will appear in order for you to set

the higher voltage value you wish to work. The maximum value

allowed is 15,5V. For security reasons (ex: charging the battery

with an external power supply), if the voltage in the car is

higher than the value selected then the CCPWM60A will stop

working and an alarm will appear.

To set this value just proceed in the same way as explained for

the setting the amperage.

5. Press right button (Next) to move to Minimum Voltage Panel

CCPWM60A – Installation Manual

Saved