Daxten SCOUTCOMBO - Manual de instalação - Página 4

Procurar online ou descarregar pdf Manual de instalação para Interruptor Daxten SCOUTCOMBO -. Daxten SCOUTCOMBO - 7 páginas. Soho kvm switch
Também para Daxten SCOUTCOMBO -: Brochura (2 páginas), Manual de instalação (10 páginas)

Imprimir página
Using the SCOUTcombo
The SCOUTcombo provides two methods to select the desired computer. You may either use the
Select button on the unit, or make use of the keyboard Hot Key commands.
Keyboard Hot Key commands
To send Hot Key commands to the SCOUTcombo switch,
press and release Scroll Lock
Enter, for the desired effect. The following commands are supported:
First Key
Second Key
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
Scroll Lock
In Auto-Scan mode, the image shown on the monitor will automatically switch to the next computer.
The delay is user definable between 5 to 250 seconds (see Table above). After the last computer has
been shown, the first computer will be shown again.
Note: In this mode, there is no mouse control.
You can stop the Auto-Scan mode by entering a keyboard command, e.g. Switch to PC 1
Rear Panel Layout 2-Port switch
Scroll Lock within 5 seconds. Press a command key followed by
Command Key
1 Enter
,
,
or
1
2
3
4 Enter
 Enter
 Enter
S Enter
S
5
Enter
Command Result
Switches to PC connected to port 1
Switches to the desired PC
Switch to previous PC
Switch to next PC
Toggle Auto-Scan mode ON
Set Auto-Scan interval to 5
seconds.
The scan interval can be between 5
to 250 Seconds