Great Little Trading Paddington Manual - Página 8

Procurar online ou descarregar pdf Manual para Mobiliário de interior Great Little Trading Paddington. Great Little Trading Paddington 10 páginas. Bunkbed

Imprimir página

Hardware for Step 7:

6x #5 Connecting Bolts 80mmL

6x #6 Barrel Nuts

STEP 7:

Take the lower side rail (H) and orientate with the wooden slat support rail closest to

the lower edge. With one person supporting the side rail, connect with the bed end

at the lower position as shown using the dowels. Insert 1x barrel nut (#6) into the

large hole on the side rail, then insert 1x LONGER 80mm connecting bolt (#5) from

the outside leg and tighten with your fingers.

Repeat at the other end of the side rail with the other bed end.

Now attach the upper side rail (H) at both ends using the steps above.

Now attach 1x shorter front guard rails (J) to one bed end above the upper side

rail using the 1x barrel nut (#6) and 1x longer connecting bolt (#5). When in place,

connect the ladder panel (N or M) with the front guard rail using the dowels. This will

support the guard rail. Fully tighten this bolt.

Repeat with 2nd front guard rail and 2nd ladder panel.

(see images on step 8 for the ladder positioning)

Now go back and FULLY TIGHTEN all 12x bolts used in steps 6 & 7 using

the Allen key provided.

#10

Hardware for Step 8:

8x #10 Hole Plugs

#10

STEP 8:

If you haven't already done so in the last step, locate

the ladder side panels (N & M) onto the front guard

rails to support them.

Next install 8x hole plugs (#10) into both sides of the

4x holes on the lower rear side rail H as shown.