Gaggenau VG 231 120 IN Manual de instruções - Página 8
Procurar online ou descarregar pdf Manual de instruções para Hob Gaggenau VG 231 120 IN. Gaggenau VG 231 120 IN 16 páginas. Gas wok
Imprimir página
Operating the appliance
en
Setting up the burner
The torch parts should be fitted and hung up, otherwise
it may cause malfunction in the ignition state or during
operation. Fit the burner head so that the thermocouple
in the corresponding recess is positioned at the tip of
the burner. The snap-on lock must be snapped in place
at the corresponding recess on the burner head on the
burner ring.
8
Operating the appliance
N otes
O p e r a t i n g t h e a p p l i a n c e
–
Only use the accessories specified. Do not line the
stainless steel recess (e.g. with aluminium foil).
–
Do not cover the ventilation openings on the back
of the control panel.
–
The burner and ignition plug must be clean and dry.
–
Only light the burners if the pan supports and all
burner parts are correctly fitted.
–
To ignite a burner, firmly press the control knob
down as far as possible and hold it there, then turn
it to the required position.
–
Once ignited, press and hold the control knob for
approx. 2 to 4 seconds to enable the heat sensor
that opens the gas flow to heat up first.
–
If the flame does not ignite within 2 to 4 seconds,
turn the control knob anti-clockwise to the lowest
setting and, once ignited, turn it back to the highest
setting. It can often be quicker to ignite the burner
in the lowest setting because different gases have
different ignition characteristics.
–
When one burner is ignited, an ignition spark will
also be generated at all the other burners.
–
Do not touch the ignition plug while the gas
appliance is being lit.
–
It is important to keep the appliance clean. If the
ignition plugs are dirty, this may cause ignition
problems. Clean the ignition plugs regularly with a
small, non-metallic brush. Take care to prevent the
ignition plugs from suffering any heavy knocks.