Great Plains Industries GPRO PRO25-012PO/XTS Manual do Proprietário - Página 6

Procurar online ou descarregar pdf Manual do Proprietário para Bomba de água Great Plains Industries GPRO PRO25-012PO/XTS. Great Plains Industries GPRO PRO25-012PO/XTS 8 páginas.

Imprimir página

SYMPTOM

G. MOTOR OVERHEATS

Application

Pump Housing

Performance:

Pump Rate

Duty Cycle

Suction Lift:

Discharge Lift:

Operating Temperature

XTS Operating Temperature

Bypass Pressure

Electrical Specifications:

Input

Current Draw

Motor

Motor Approval

Motor Protection

Cord*

Fuse

Mechanical Connection:

Bung

Inlet

Outlet

Accessories:

Hose Type

Hose Size

Manual Nozzle

Automatic Nozzle

Weight:

PRO25-012PO

PRO25-024PO

TROUBLESHOOTING

PROBABLE CAUSE

1. Pumping high viscosity fluids

2. Clogged filter assembly

3. Clogged or broken suction pipe Remove pump and clear suction pipe, replace as needed.

4. Duty cycle too long

5. Motor failure

6. Bypass poppet clogged

SPECIFICATIONS

PRO25-012

Designed to safely transfer low viscosity petroleum fuels such as gasoline (up to 15% alcohol blends

such as E15), diesel fuel (up to 20% biodiesel blends such as B20) and kerosene. Pump is designed

for permanent mounting on vented storage tanks.

Cast Iron

Up to 25 GPM (94 LPM)

30 min. ON, 30 min. OFF

Up to 15 feet (4.6 meters)

Up to 10 feet (3 meters)

Extreme Temperature Series pumps are capable of operation down to -40° F.

Any pump operation below -20° F has not been evaluated by UL.

12-volt DC

35 amps

2000 RPM, 4/10 hp (300 watts)

cULus Listed. Class I, Division 1, Group D

40 amp circuit breaker

15 feet of 10 gauge (4.6 meters)

40 amp

2 inch NPT

1 inch NPT

Buna-N Electrically Conductive Discharge Hose

1 in. NPT x 1 in. 18 ft. (5.5 m)

1 in. NPT Diesel

56.7 lbs/25.7 kg

N/A

CORRECTIVE ACTION

Pump only low viscosity fluids.

Clean filter assembly.

Duty cycle is 30 minutes ON and 30 minutes OFF.

Ball bearings damaged. UL Listing requires specific treatment for

motor replacement, contact factory.

Remove bypass poppet and clean.

-20° F to +125° F (-29° C to +52° C)

20 PSI

2000 RPM, 4/10 hp (300 watts)

cULus Listed. Class I, Division 1, Group D

15 feet of 10 gauge (4.6 meters)

Buna-N Electrically Conductive Discharge Hose

1 in. NPT x 1 in. 18 ft. (5.5 m)

PRO25-024

Up to 25 GPM (94 LPM)

30 min. ON, 30 min. OFF

Up to 15 feet (4.6 meters)

Up to 10 feet (3 meters)

24-volt DC

20 amps

20 amp circuit breaker

20 amp

2 inch NPT

1 inch NPT

1 inch Diesel

N/A

56.7 lbs/25.7 kg