AFG M007 Manual - Página 15
Procurar online ou descarregar pdf Manual para Mobiliário para bebés e crianças AFG M007. AFG M007 16 páginas. Changing table
Wall Safety Strap
• TOOLS NECESSARY: RUBBER MALLET, PHILLIPS SCREW DRIVER.
WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITURE MAY TIP OVER.
FOR YOUR CHILD'S SAFETY, PLEASE INSTALL THE SAFETY WALL STRAP BEHIND
THE FURNITURE.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT AND KEEP
THESE INSTRUCTIONS FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE
EMAIL US AT:
WWW.AFGBABYFURNITURE.COM
Safety Wall Strap 8" x 1.5" (1 pc)
Screw D4 x 3/4" (1 pc)
STEP 1: Make a mark near the top of the back
side of the furniture (in the center toward the top
frame of the furniture of where you would like to
install the safety wall strap). Insert the short screw
through the washer and through the safety wall
strap. Install the screw into where the mark was
made behind the furniture using a Phillips screw
driver
STEP 2: Locate a wall stud. With the back of the
furniture against the wall, locate the middle of the
top of the dresser and make a mark against the
wall. Measure 5cm down from the mark and drill a
1/8" pilot hole through the wall stud and into the
plaster wall.
CAUTION: The changer unit must be centered on
a wall stud as shown. If you are unsure of how to
locate the wall stud, contact a professional
contractor.
Washer (2 pcs)
Wall Stud (1 pc)
2014 AFG Baby Furniture M007 Assembly Sheet ©
OR VISIT
Screw D4 x 1-3/8" (1 pc)
14