HiBoost Home 10K Manual do utilizador - Página 6
Procurar online ou descarregar pdf Manual do utilizador para Extensor HiBoost Home 10K. HiBoost Home 10K 20 páginas. Mobile signal booster
Imprimir página
commercially available signal strength meter.
We highly recommend that you use the LCD display on the booster as this
method is generally more convenient. However, in situations where the desired
carrier's signal is much weaker than the other local signals, using a mobile
phone, app, or signal level meter can be a more accurate method of homing in
on the best signal for installation.
. LCD Display Method
Connect the outdoor antenna to the booster's outdoor port. Fix the outdoor
antenna on the roof of the building and point it to the nearest cell tower. Then
have a look at the gain and output power value displayed on the booster's LCD.
The outdoor antenna receives the strongest signal when the booster's downlink
output power reaches its highest level in each band. If the LCD shows maximum
gain and power, and there are not any alarms (no ISO, ALC, OFF legend
flashing and no quick flashing green or red in LEDs), it means the present
location is the best for ensuring that the booster has maximized performance.
The maximum downlink power for Home 10K is 12dBm, and the maximum
downlink gain is 62-65dB.
Note: These showed values may vary dynamically at times between 1-3 dB
which is normal due to outdoor signal conditions.
. Mobile Phone Method
You can use a mobile phone to test signal strength on the top of the building. The
number of bars on the network indicator will define approximate strength of the
received signal. Normally the roof of the building is the best place to receive the
strongest signal. As shown on the drawing below, you need to test the signal in
the points from A to E, and select the location with the best signal strength for
outdoor installation. It is recommended to use a mobile app that can display in a
test mode the signal level in dBm units. It is more accurate than checking the
6/18