Automation Direct DL405 Manual - Página 2

Procurar online ou descarregar pdf Manual para Cabos e conectores Automation Direct DL405. Automation Direct DL405 8 páginas. Fuse connector module zl-cm16tf2 cables and plc i/o modules
Também para Automation Direct DL405: Instrução (3 páginas), Instrução (3 páginas)

Imprimir página

Introduction

Overview

The Purpose of

this Manual

Supplemental

Manuals

Who Should Read

this Manual

Quality Technical

Manuals and

Technical Support

This manual is designed to allow you to setup

and install your DL405 Data Communications

Module (DCM). This is the only manual you will

need if you are using the DCM as an extra

general purpose communication port for your

DL405 PLC system. If you plan on using the

DCM as a network master or slave on a

Direct NET network, we suggest that you read

the Direct NET manual first. The Direct NET

manual provides detailed descriptions of

network configurations, protocol, and the PLC

programs that are necessary to control

communications with the DCMs.

If you plan on using a personal computer as the network master, it may be helpful to

read the Direct NET manual first. In either case, the Direct NET manual can be

useful because it provides detailed descriptions of network configurations, various

cable connections, etc.

Depending on which products you have purchased, there may be other manuals that

are necessary or helpful for your application. These are some suggested manuals:

User Manuals

Direct NET Network Guide

Direct Soft Programming Software

If you plan to use your D4–DCM to communicate with another PLC, you will need the

appropriate user manual for the other PLC.

If you plan to use your D4–DCM module as an interface to HMI or PC Control

software or to an Operator Interface panel, you will need to refer to the

documentation for that product.

If you need an additional communications port for your DL205 PLC and you

understand the basics of installing and programming PLCs, this is the right manual

for you. This manual gives you the information you need to set up an active port on

the D4–DCM module.

We strive to make our manuals the best in the industry. We rely on your feedback to

let us know if we are reaching our goal. If you cannot find the solution to your

particular application, or, if for any reason you need additional assistance, please

call us at 800–633–0405. Our technical support group is glad to work with you in

answering your questions. They are available weekdays from 9:00 a.m. to 6:00

p.m. Eastern Time. You can also contact us on the worldwide web at:

http://www.plcdirect.com

You can also find a variety of support solutions at our 24–hour per day BBS at:

If you find a problem with any of our products, services, or manuals, please fill out

and return the 'Suggestions' card that came with this manual.

part number

(PLC Direct Web site for general info/file transfers)

770–844–4209

DA–DNET–M

DA–DSOFT–M