Automation Direct DL405 Manual - Página 3

Procurar online ou descarregar pdf Manual para Cabos e conectores Automation Direct DL405. Automation Direct DL405 8 páginas. Fuse connector module zl-cm16tf2 cables and plc i/o modules
Também para Automation Direct DL405: Instrução (3 páginas), Instrução (3 páginas)

Imprimir página
Steps
The main contents of this manual are organized into five steps:
1
Introduction
Build the Cable
2
3
Set the DCM Switches
4
Install the DCM and Start
the Network
5
Verify and Troubleshoot
Appendix
Additional reference information for the D4–DCM is available in this appendix:
RLL Communications
A
Programs
tells you about the Data Communication Module and its
uses. It lists other manuals you may need and tells you how
to get additional technical assistance, if necessary.
guides you through building the necessary communication
cable, covering physical and electrical specifications.
guides you through the setup of the rotary and DIP switches
to select communication parameters and network
addressing. It shows the proper method of inserting the
module into the base.
tells you what to consider when laying out your network
cable and how to terminate the individual conductors at the
networked devices. It gives you specific cabling examples,
showing pinouts for each device.
introduces the use of the DCM's status indicator lights as a
diagnostic tool. It gives you status indicator light patterns to
help you identify problems that could be preventing
communications.
provides helpful examples of Ladder Logic programs for
DCM communications.
3 3
Introduction