Kintech Engineering BGAN Manual do utilizador - Página 5
Procurar online ou descarregar pdf Manual do utilizador para Unidade de controlo Kintech Engineering BGAN. Kintech Engineering BGAN 10 páginas.
Também para Kintech Engineering BGAN: Instalação e orientação da antena (8 páginas)
Imprimir páginaBGAN SATELLITE | INSTALLATION & ANTENNA ORIENTATION
10. You should fine adjust the BGAN antenna until the signal strenght is as strong as it can be on the given location.
11. Exit the BGAN terminal in your web browser and turn off the BGAN modem.
12. Disconnect the ethernet cable from your PC and plug it back into the Moxa Nport.
13. Now turn on the BGAN modem, the data logger and the Moxa unit. If the BGAN modem and the Moxa unit and data logger
are already turned on, then just turn the data logger off and then on again.
HOW TO CONFIGURE BGAN COMMUNICATION IN ATLAS
1. Open the corresponding data logger in Atlas and click on "Site Settings"
2. Click on the "Communication" on the left-hand menu and select BGAN in the "Connection type" section.
3. Type the IP address associated to your BGAN SIM card (this was sent to you by Kintech Engineering) and "950" in TCP
Port.
If you have followed all of the above mentioned instructions you should now be able to connect to the data logger directly
from Atlas. Make a short (not to consume to much data) realtime connection from Atlas to the data logger to verify this.
For more information please contact [email protected]
or visit our website www.kintech-engineering.com