Kintech Engineering BGAN Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Unidade de controlo Kintech Engineering BGAN. Kintech Engineering BGAN 10 páginas.
Também para Kintech Engineering BGAN: Instalação e orientação da antena (8 páginas)
Imprimir páginaBGAN SATELLITE | INSTALLATION & ANTENNA ORIENTATION
5. Set the IP addres 192.168.128.150 / 255.255.255.0 on your laptop
5A. Start by disabling the Wifi connection on your laptop.
5B. Open the "Control Panel" > "Network and Internet" > "Network and Sharing Center" > "Ethernet". Now right-click
the "Ethernet Status" icon and click on "Settings".
5C. In the "Ethernet Settings" tab, click on "Internet Protocol version 4 (TCP/IPv4)" and then click "Properties".
5D. In the properties window set the following configuration:
Click on "Use the following IP address:"
IP Address: 192.168.128.150
Subnet mask: 255.255.255.0
Default gateway: Leave empty --> (Important as this avoids consuming data from your BGAN data plan)
5E. Now click on "OK" until you exit the menu.
6. Now open your web browser to access the BGAN terminal by typing the following default IP address: 192.168.128.100.
7. In case you have received an email from Kintech Engineering with a unique APN username and password you must use
these for the BGAN configuration.
To do this, click on the "Connections" section and select Manage APN´s and the window shown in the manual below will
appear. To display the APN parameters click on the QC:BGAN.INMARSAT.COM... (indicated by an arrow in the screenshot
below). This will allow you to edit the parameters and you will be able to add the username and password you received by
email. Once added, save the changes. These parameters are unique for each BGAN sim card, so they cannot be used for other
installations.
For more information please contact [email protected]
or visit our website www.kintech-engineering.com