Kintech Engineering BGAN Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Unidade de controlo Kintech Engineering BGAN. Kintech Engineering BGAN 10 páginas.
Também para Kintech Engineering BGAN: Instalação e orientação da antena (8 páginas)
Imprimir páginaBGAN SATELLITE | INSTALLATION & ANTENNA ORIENTATION
HOW TO PREPARE THE ORBIT 360 DATA LOGGER, MOXA & BGAN MODEM
1. Verify that all cables are plugged in correctly and check for continuity (according to the wiring diagram shown below).
2. Make sure the data logger has the correct .sit file configured with BGAN communication in Atlas (see chapter 4 of the Orbit
360 user manual).
3. Verify that the BGAN SIM card is activated correctly with remaining data on the subscription.
4. Make sure that the IP from which you are trying to connect to the BGAN has permission in the Inmarsat Firewall to make the
communication. To avoid this requirement you can use the option in Atlas to use a "M2M Gateway in BGAN connections". This
setting can be found in "Settings>Process" in Atlas (see screenshot here below).
BGAN ANTENNA
BGAN MODEM
Ext. COM
ORBIT 360 DATA LOGGER
Ext. COM
RS485
Modbus
Frequency Channels
Analog Channels
RS-232 SERIAL DEVICE SERVER
HOW TO INSTALL AND PRE-ORIENT THE BGAN ANTENNA
The BGAN system operates with a directional antenna which means that the orientation of the antenna is crucial for its opera-
tion and good coverage.
Before installing the antenna support boom to the mast make sure the antenna will be located and orientated in such a way
that it has a clear line of sight between the antenna and the satellite (unobstructed).
Follow these steps to verify in what direction to point the antenna. These steps should be performed outside:
Do not stand in front of the antenna. This device emits high-energy radiofrequency waves. Do not place the head or
other body parts in front of the satellite antenna when the system is operational. Keep a distance of at least 1 m from the front
of the satellite antenna.
1. Connect the BGAN RF antenna and screw the antenna onto the support boom (final antenna orientation will be adjusted
later).
2. Connect the cross-wire ethernet cable from the BGAN modem to your laptop.
3. Power on the BGAN modem.
4. Wait until the Power and the GPS LEDs are on (fixed).