Gait up Physilog 5 Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Sensores de segurança Gait up Physilog 5. Gait up Physilog 5 17 páginas.
Também para Gait up Physilog 5: Manual do utilizador (12 páginas), Manual do utilizador (17 páginas)

Imprimir página

Physilog®5 elements

Charging

The Physilog®5 is charged via the microUSB port. Plug the microUSB connector of the cable delivered

with the Physilog®5 to the Physilog®. Plug the USB connector to a Computer or charger (see voltage

specifications below). Physilog®5 must be turned off for charging. Do not charge Physilog® when

room temperature is outside of range 0°C to 45°C.

Physilog®, forcing the connector may permanently damage the Physilog® and

compromise its waterproofing.

Low battery level is indicated by orange (red and green LED on) blinking during measurement or if

the Physilog® blinks rapidly 3 times red when starting and doesn't start the recording (see LED

indications below). A battery level estimation is available in the GaitUp mobile application (free to

download from www.gaitup.com/support or from Google Play Store). When the Physilog® is

discharged, plug it for charging for at least 30 minutes before use.

It is recommended to avoid complete discharging of the Physilog®5, therefore check that the

Physilog® sensors are off when you store them. After a long period without using the Physilog®, plug

it for charging for at least 30 minutes before use. It may happen that the LED doesn't blink orange

at the beginning of charging after the battery was very low, to see the charging ongoing shortly push

the main button or disconnect and reconnect after some charging time.

Physilog5 user manual v1.2.6 Date: 19.06.2018

Be careful to plug the microUSB cable in the correct orientation into the

EPFL Innovation Park, Bat C. CH-1015 Lausanne

TVA CHE-145.136.760

Gait Up SA