Airdog X3 KJ200F-X3 Manual - Página 5

Procurar online ou descarregar pdf Manual para Filtro de ar Airdog X3 KJ200F-X3. Airdog X3 KJ200F-X3 7 páginas.

Air Quality Sensor Cleaning

Airdog air puriﬁer has an embedded air quality sensor. To keep

the air quality sensor reading correctly, please clean the sensor

as illustrated every 6 months, using dry or with rubbing alcohol

cotton swabs as illustrated.

Full Cleaning Cycle

1. We recommend a complete cleaning every 6-12 months.

2. First, unplug the power supply. Open the back shroud, pull out the ionization wire frame and collecting plates.

Pull out the protective rubber sleeve as illustrated in (Pic 1).

3. Clean the ionization wire frame and collecting plates properly according to the previous instructions.

4. Use a wet cloth to wipe down all surfaces of the protective rubber sleeve, including notches. For better result,

wash the entire rubber sleeve in water.

5. Clean the inner walls of the air puriﬁer with a wet cloth (Pic 2).

6. Wash the pre-ﬁlter in water, or clean it by vacuum.

7. Dry the parts completely, then put them back in order.

Pic 1

Pic 2

App Setting

Please keep your Wi-Fi on to help you ﬁnish your App setting.

iOS

Scan to download

Open App

Use email address to set up an account

Click "+" on top right corner

Press "WiFi" button on remote

Start to pair

Done

Android

Scan to download

Select model

Enter WiFi name & password

If failed, please keep the device live for

at least 5 minute, and try again