Airdog X3 KJ200F-X3 Посібник - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник для Очищувач повітря Airdog X3 KJ200F-X3. Airdog X3 KJ200F-X3 7 сторінок.
Air Quality Sensor Cleaning
Airdog air purifier has an embedded air quality sensor. To keep
the air quality sensor reading correctly, please clean the sensor
as illustrated every 6 months, using dry or with rubbing alcohol
cotton swabs as illustrated.
Full Cleaning Cycle
1. We recommend a complete cleaning every 6-12 months.
2. First, unplug the power supply. Open the back shroud, pull out the ionization wire frame and collecting plates.
Pull out the protective rubber sleeve as illustrated in (Pic 1).
3. Clean the ionization wire frame and collecting plates properly according to the previous instructions.
4. Use a wet cloth to wipe down all surfaces of the protective rubber sleeve, including notches. For better result,
wash the entire rubber sleeve in water.
5. Clean the inner walls of the air purifier with a wet cloth (Pic 2).
6. Wash the pre-filter in water, or clean it by vacuum.
7. Dry the parts completely, then put them back in order.
Pic 1
Pic 1
Pic 2
App Setting
Please keep your Wi-Fi on to help you finish your App setting.
iOS
Scan to download
Open App
Use email address to set up an account
Click "+" on top right corner
Press "WiFi" button on remote
Start to pair
Done
Android
Scan to download
Select model
Enter WiFi name & password
If failed, please keep the device live for
at least 5 minute, and try again