gala gar GasWeld DARK 5998F Manual de instruções - Página 6

Procurar online ou descarregar pdf Manual de instruções para Acessórios de soldadura gala gar GasWeld DARK 5998F. gala gar GasWeld DARK 5998F 13 páginas. Electronic welding screen with colour vision

Imprimir página

GasWeld

3.- OPERATION

1. Before first use, remove the protective film from both the

outer and inner filter lens (ADF).

2.- Adjust the head to your measurement, both in extension and

diameter, until a firm and comfortable fit is obtained.

a) Adjust the band diameter with the adjustment knob on the

back of the head. Turn the knob clockwise to tighten; or turn

counterclockwise to loosen the band.

b) Adjust the upper band to one of the preset

positions for correct depth.

c) To adjust the viewing angle, reposition the ratchet

mechanism located on the side of the suspension to the

desired elevation position. Once the desired angle is

achieved, ensure that the locking pins are secure. The hull

should be able to be folded down, but should not deflect

downwards when in place for welding.

d) To adjust the distance between the user's face and the ADF,

press the set of buttons located on the sides until the

headband can move freely back and forth. This must be

done on one side at a time, and both sides must be in the

same position for correct operation of the auto-darkening

filter.

e) Shade control is done from the outside of the mask with the

knob, where the first locking position is DIN 3, position

GRINDER, and then, once the knob is unlocked, the shades can

be adjusted from 9 to 13, as required.

DARK

SUPERIOR

4.- TECHNICAL SPECIFICATIONS

Gasweld DARK

CARTRIDGE SIZE

AREA OF VISION

RESPONSE TIME

PROCESSOR

NO. SENSORS

TYPE OF VISION

BATTERY TYPE

MINIMUM AMPERAGE

TYPES OF WELDING

CURRENT TYPES

IR / UV PROTECTION

RANGE OF SHADOWS

REGULATION KNOB

OPERATING TEMPERATURE

DELAY

SENSITIVITY

ON / OFF

OPTICAL CLASS

CERTIFICATIONS

HULL MATERIAL

Ref.: 5998F

Ref.: 5998FC

Specifications

110x90 mm.

92x43 mm.

1/25000s

CX10

2 DIGITAL

FULL COLOUR

CR2032 (REPLACEABLE) X1

MMA / TIG / MIG / PLASMA

AC & DC

Up to DIN 16 - 98%.

3 (GRIND) / 9-13 (WELD)

EXTERNAL

-5ºC to +55ºC

AUTOMATIC

1/1/1/2

EN175 - EN379 / CE

ABS REINFORCED