DBI SALA Anchor on the Go Manual de instruções de instalação e funcionamento - Página 3
Procurar online ou descarregar pdf Manual de instruções de instalação e funcionamento para Equipamento industrial DBI SALA Anchor on the Go. DBI SALA Anchor on the Go 20 páginas. Portable roof anchor for metal roofs
Imprimir páginaGENERAL USE WARNINGS
VISUALLY INSPECT TEMPORARY ANCHOR PRIOR TO, AND
FOLLOWING EACH USE, TO ENSURE IT IS IN A SERVICEABLE
CONDITION (refer to section 5.1). IF IN DOUBT, REMOVE FROM
SERVICE IMMEDIATELY.
INSTALLATION AND USE OF THIS PORTABLE ROOF ANCHOR
MUST BE PERFORMED BY, OR UNDER THE SUPERVISION OF A
COMPETENT PERSON.
DO NOT ATTACH OR USE TEMPORARY ROOF ANCHOR WITHOUT
FIRST
READING,
UNDERSTANDING
&
FOLLOWING
THESE
INSTRUCTIONS.
DO NOT USE THE PORTABLE ANCHOR FOR ANY PURPOSE OTHER
THAN FOR WHICH IT HAS BEEN DESIGNED.
PRIOR TO COMMENCEMENT OF WORK, PLEASE ENSURE THAT
YOU HAVE READ AND COMPREHENDED THE DETAIL REFERRING
TO POSITIONING OF THE ANCHOR AND THE APPROPRIATE SAFE
WORK AREA.
THIS TEMPORARY ANCHOR POINT MUST BE SUBJECTED TO A
DOCUMENTED INSPECTION EVERY 12 MONTHS BY A COMPETENT
PERSON.
1.0 INTRODUCTION
This is a Temporary Anchorage device that
has been designed as a
component of a personal fall arrest system and is for use only where
there are no other practical means of connection or work practice.
Relevant State or national legislation may impose obligations to provide
safe systems of work. To discharge these responsibilities, conduct hazard
identification and risk assessment with reference to the hierarchy of
control of risks. Refer to your local State or Federal guidelines or Code of
Practice for safe work on roofs for more details.
Anchors must be properly installed prior to the operator attaching to
them and then used according to requirements contained in this manual.
3