909 10CSMS Manual de instruções - Página 7

Procurar online ou descarregar pdf Manual de instruções para Serra 909 10CSMS. 909 10CSMS 20 páginas. 15 amp 10" 254mm single bevel laser guided slide miter saw

Imprimir página

Grounding

Adapter

Grounding

Means

•

Use only a three wire extension cord with a 3-prong

grounding type plug and 3-hole receptacles that accept

the tool's plug as shown in the diagram. Repair or replace

damaged or worn cords immediately.

CAUTION:

in all cases, make certain the receptacle in

question is properly grounded. If you are not sure, have

a qualified electrician check the receptacle.

•

Do not abuse the cord. Never use the cord to carry the

tool or to pull the plug from an outlet. Keep the cord away

from heat, oil, sharp edges or moving parts. Replace

damaged cords immediately. Damaged cords increase

the risk of electric shock.

•

When operating a power tool outside, use an outdoor

extension cord marked "W-A" or "W". These cords are

rated for outdoor use and reduce the risk of electric shock.

WARNING:

this miter saw is for indoor use only. Do not

expose it to rain or use in damp locations.

Metal Screw

Cover of Grounded

Outlet Box

Grounding

Extension cords

•

Replace damaged cords immediately. Use of damaged

cords can shock, burn or electrocute.

•

If an extension cord is necessary, a cord with adequate

size conductors should be used to prevent excessive

voltage drop, loss of power or overheating. The table

shows the correct size to use, depending on cord length

and nameplate amperage rating of tool. If in doubt, use

the next heavier gauge. Always use U.L. and CSA listed

extension cords.

RECOMMENDED SIZES OF EXTENSION CORDS

Tool's

Volts

Ampere

rating

3–6

120V~

6–8

120V~

8–10

120V~

10–12

120V~

12–16

120V~

Accessories

The 909 10CSMS Single Bevel Slide Compound Miter Saw

is supplied with the following accessories as standard:

•

Saw blade (fitted)

•

Workpiece clamp

•

6 mm hex key

•

Side bars x 2

•

Dust bag

•

Instruction manual

Total length of cord in feet. Cord size

in A.W.G. (minimum)

25ft

50ft

100ft

150ft