ADEO CONTROL SP-C4-1 Manual de instalação e utilização - Página 6

Procurar online ou descarregar pdf Manual de instalação e utilização para Acessórios ADEO CONTROL SP-C4-1. ADEO CONTROL SP-C4-1 8 páginas. Wifi super plug

Imprimir página

Adeo Group s.r.l.

Via della Zarga n. 50 - 38015 LAVIS (TN)

Tel: +39 0461 248211 - Fax: +39 0461 245038

Mail: [email protected] – www.adeogroup.it

Use with Control4

The

Super Plug

can be used within the CONTROL4 system through the free driver provided by ADEO GROUP

(https://adeogroup.it/sp-c4-1-super-plug). Thanks to this driver, the plug command can be integrated with

the other CONTROL4 system functions, easily creating home automation functions integrated with audio /

video distribution.

Once the driver has been inserted inside the COMPOSER, it is necessary to associate it with a

through its unique serial number, detectable through the app as shown above.

Enter the serial code (in the format DVES_XXXXXXXXX) in the PLUG ID field of the driver and press Set:

Once the serial number has been set, wait a few seconds for the COMPOSER to scan the network to identify

the plug. When the plug is found, its IP address is automatically reported in the IP ADDRESS field instead of

the default value; the other information fields are also automatically updated:

PLUG NAME

FIRMWARE VERSION

HARDWARE VERSION

MANUFACTURER

WIFI SIGNAL

If an automatic recognition does not occur, from the ACTIONS tab just click on Discovery.

At this point the driver is ready to interact with the plug; it is possible to test the communication using the

buttons provided in the driver's ACTIONS section:

Label assigned to the plug through the Super Plug

Version number of the firmware inside the plug

Plug hardware version ID

Manufacturer

WiFi Signal

A d e o C o n t r o l è u n b r a n d d i A d e o G r o u p s . r . l .

Adeo Control

SP-C4-1

Device Manual

Rev. 3.0

Pag. Pag. 6 / 8

Super Plug