ADEO CONTROL SP-C4-1 Руководство по установке и использованию - Страница 6
Просмотреть онлайн или скачать pdf Руководство по установке и использованию для Аксессуары ADEO CONTROL SP-C4-1. ADEO CONTROL SP-C4-1 8 страниц. Wifi super plug
Печатать страницуAdeo Group s.r.l.
Via della Zarga n. 50 - 38015 LAVIS (TN)
Tel: +39 0461 248211 - Fax: +39 0461 245038
Mail: [email protected] – www.adeogroup.it
Use with Control4
7.
The
Super Plug
can be used within the CONTROL4 system through the free driver provided by ADEO GROUP
(https://adeogroup.it/sp-c4-1-super-plug). Thanks to this driver, the plug command can be integrated with
the other CONTROL4 system functions, easily creating home automation functions integrated with audio /
video distribution.
Once the driver has been inserted inside the COMPOSER, it is necessary to associate it with a
through its unique serial number, detectable through the app as shown above.
Enter the serial code (in the format DVES_XXXXXXXXX) in the PLUG ID field of the driver and press Set:
Once the serial number has been set, wait a few seconds for the COMPOSER to scan the network to identify
the plug. When the plug is found, its IP address is automatically reported in the IP ADDRESS field instead of
the default value; the other information fields are also automatically updated:
PLUG NAME
FIRMWARE VERSION
HARDWARE VERSION
MANUFACTURER
WIFI SIGNAL
If an automatic recognition does not occur, from the ACTIONS tab just click on Discovery.
At this point the driver is ready to interact with the plug; it is possible to test the communication using the
buttons provided in the driver's ACTIONS section:
Label assigned to the plug through the Super Plug
Version number of the firmware inside the plug
Plug hardware version ID
Manufacturer
WiFi Signal
A d e o C o n t r o l è u n b r a n d d i A d e o G r o u p s . r . l .
Adeo Control
SP-C4-1
Device Manual
Rev. 3.0
Pag. Pag. 6 / 8
Super Plug