High Connexion Italia FOXBOX GT2 Manual de início rápido

Procurar online ou descarregar pdf Manual de início rápido para Porta de entrada High Connexion Italia FOXBOX GT2. High Connexion Italia FOXBOX GT2 2 páginas.

Imprimir página

EQUIPMENT SHIPPED

• FoxBox GT2;

• Wall power supply (12V - 2A);

• GSM antennae.

all the components have been tested before the shipment.

Note:

OPERATIONAL REQUIREMENTS

• Electricity source (100 – 240 VAC);

• LAN Ethernet and an Ethernet RJ45 cable;

• A PC with a web browser (recommended: Mozilla Firefox) on the same network of the FoxBox (by default, IP

address like 192.168.0.x, FoxBox's one is 192.168.0.98);

• A working SIM card(s), able to send and receive SMS;

• A Phillips screwdriver.

Note: please check that you are installing the device in a place with enough GSM coverage. You can do it using a

common mobile phone.

COMPONENTS INSTALLATION

before starting the installation, please check that the SIM doesn't have a PIN code. In case there is, please

Note:

remove it using a common mobile phone.

FOXBOX GT2

QUICK INSTRUCTIONS

01.

Insert the SIM cards in the placeholders.

Note: the SIM card slots are positioned on

the lower side of the board!

02.

Close the FoxBox case and fasten all the

four lateral screws.

03.

Plug-in the antenna connectors.

04.

Plug-in a RJ45 Ethernet cable.

Note: connect the cable to the central

Ethernet port if you want to use Zeroconf

(aka "Bonjour".)

05.

Optionally, plug-in a Serial cable.

06.

Plug-in the power supply.

QUICK-START GUIDE