High Connexion Italia FOXBOX GT2 Краткое руководство по эксплуатации

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Шлюз High Connexion Italia FOXBOX GT2. High Connexion Italia FOXBOX GT2 2 страницы.

Печатать страницу

EQUIPMENT SHIPPED

• FoxBox GT2;

• Wall power supply (12V - 2A);

• GSM antennae.

all the components have been tested before the shipment.

Note:

OPERATIONAL REQUIREMENTS

• Electricity source (100 – 240 VAC);

• LAN Ethernet and an Ethernet RJ45 cable;

• A PC with a web browser (recommended: Mozilla Firefox) on the same network of the FoxBox (by default, IP

address like 192.168.0.x, FoxBox's one is 192.168.0.98);

• A working SIM card(s), able to send and receive SMS;

• A Phillips screwdriver.

Note: please check that you are installing the device in a place with enough GSM coverage. You can do it using a

common mobile phone.

COMPONENTS INSTALLATION

before starting the installation, please check that the SIM doesn't have a PIN code. In case there is, please

Note:

remove it using a common mobile phone.

FOXBOX GT2

QUICK INSTRUCTIONS

01.

Insert the SIM cards in the placeholders.

Note: the SIM card slots are positioned on

the lower side of the board!

02.

Close the FoxBox case and fasten all the

four lateral screws.

03.

Plug-in the antenna connectors.

04.

Plug-in a RJ45 Ethernet cable.

Note: connect the cable to the central

Ethernet port if you want to use Zeroconf

(aka "Bonjour".)

05.

Optionally, plug-in a Serial cable.

06.

Plug-in the power supply.

QUICK-START GUIDE