iHealth ABP100 Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Monitor de tensão arterial iHealth ABP100. iHealth ABP100 16 páginas. Ambulatory blood pressure monitor

Imprimir página

When in charging mode, the charging status will be displayed on the LED screen. See the table below for

details.

Monitor Status

Charging

Fully charged

Battery charge <25%

Battery low

Do not change the battery. If the battery can no longer be charged, please contact Customer Service.

Overcharging the battery may reduce its lifetime.

Lithium battery replacement by inadequately trained personnel could result in a hazard such as a fire or explosion.

Do not plug or unplug the power cord into the electrical outlet with wet hands. If the AC adapter is abnormal,

please change the adapter.

Do not use the monitor while charging.

Do not use any other type of AC adapter as it may harm the monitor.

The monitor, cable, battery and cuff must be disposed of according to local regulations at

the end of their usage.

Note: The battery has limited charge cycles and may eventually need to replaced by an iHealth service provider.

Battery life and charge cycles vary by use and settings.

SET UP PROCEDURES

Download the Free iHealth App

Prior to first use, scan QR code and download the iHealth App. Follow the on-screen instructions to register and set up

your personal account.

Access the iHealth Cloud Account

Your iHealth account also gives you access to the secure iHealth cloud service.

Power on the Monitor

Connect the monitor to a USB port using the charging cable provided or press

LED screen displays all characters to power on the monitor at the first use.

ABPM SYNC AND SETUP

Bluetooth Function

The Bluetooth function is always on if the monitor has enough power. Only if the monitor is in low power

status(not enough power to take blood pressure readings), the Bluetooth function will be turned off until the

monitor has charged and have enough power.

Connect to iOS Device via Bluetooth

a. Enable Bluetooth on your iOS device.

b. Launch the iHealth App from your iOS device.

When a successful connection has been established, the Bluetooth indicator light will light up.

When sync is processing, the sync indicator will flash , when sync is finished,

the sync indicator lights up

Status Indicator

battery/charge symbol flashing slow

battery/charge symbol steady

battery/charge symbol flashing fast

for 2 seconds and then light off.

7 / 16

button at least 2 seconds until the