iHealth ABP100 Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Monitor de tensão arterial iHealth ABP100. iHealth ABP100 16 páginas. Ambulatory blood pressure monitor

Imprimir página

TAKING YOUR BLOOD PRESSURE READING AUTOMATICALLY

Long press the

Mode", the monitor shows current automatic mode on the LED screen. If the

monitor has no automatic mode parameters, the monitor shows "- -" on the LED

monitor. If the monitor has finished the automatic test, the monitor shows "END" on

the LED monitor.

In the automatic mode, the LED screen is turned off by default. During the test,

short press any button to turn on the LED screen and it will last to the end of this

measurement.

When "Auto Mode" on ,while not in a measurement, short press any button to turn on the LED screen and

the LED screen shows the last measurement result.

When "Auto Mode" on, the monitor will continue take measurements in the

scheduled time, and after the monitor get enough readings, the monitor automatic

stop taking readings.

Note: Please consult a health care professional for interpretation of pressure

measurements.

BLOOD PRESSURE CLASSIFICATION FOR ADULTS

The World Health Organization (WHO) has created the following guide for assessing high blood pressure (without

regard to age or gender). Please note that other factors (e.g. diabetes, obesity, smoking, etc.) also need to be

considered. Consult with your physician for accurate assessment.

Note: Consult your physician for proper interpretation of blood pressure results.

TROUBLESHOOTING

PROBLEM

Low Battery

LED display reads

"Er0"

for at least 2 seconds to switch on or off the "Automatic

POSSIBLE CAUSE

Battery do not have enough power

Pressure

system

before measurement

SOLUTION

Charge the battery

unstable

Retest, make sure not to move

your arm or the monitor

10 / 16