iHealth ABP100 User Manual - Page 10

Browse online or download pdf User Manual for Blood Pressure Monitor iHealth ABP100. iHealth ABP100 16 pages. Ambulatory blood pressure monitor

iHealth ABP100 User Manual

TAKING YOUR BLOOD PRESSURE READING AUTOMATICALLY

a.
Long press the
Mode", the monitor shows current automatic mode on the LED screen. If the
monitor has no automatic mode parameters, the monitor shows "- -" on the LED
monitor. If the monitor has finished the automatic test, the monitor shows "END" on
the LED monitor.
b.
In the automatic mode, the LED screen is turned off by default. During the test,
short press any button to turn on the LED screen and it will last to the end of this
measurement.
c.
When "Auto Mode" on ,while not in a measurement, short press any button to turn on the LED screen and
the LED screen shows the last measurement result.
d.
When "Auto Mode" on, the monitor will continue take measurements in the
scheduled time, and after the monitor get enough readings, the monitor automatic
stop taking readings.
Note: Please consult a health care professional for interpretation of pressure
measurements.

BLOOD PRESSURE CLASSIFICATION FOR ADULTS

The World Health Organization (WHO) has created the following guide for assessing high blood pressure (without
regard to age or gender). Please note that other factors (e.g. diabetes, obesity, smoking, etc.) also need to be
considered. Consult with your physician for accurate assessment.
Note: Consult your physician for proper interpretation of blood pressure results.

TROUBLESHOOTING

PROBLEM
Low Battery
LED display reads
"Er0"
for at least 2 seconds to switch on or off the "Automatic
POSSIBLE CAUSE
Battery do not have enough power
Pressure
system
before measurement
SOLUTION
Charge the battery
is
unstable
Retest, make sure not to move
your arm or the monitor
10 / 16