Autopage RF-505 Manual de operação - Página 8

Procurar online ou descarregar pdf Manual de operação para Alarme para automóvel Autopage RF-505. Autopage RF-505 12 páginas. Part 1
Também para Autopage RF-505: Programação do transmissor (1 páginas)

Imprimir página

Second Car Operation—

The transmitter for RF-505 has the capability to operate a second RF-505

alarm system. To program the transmitter to a second RF-505 follow these

steps:

1. Repeat steps 1 & 2 from transmitter programming.

2. Press the side Shift button on the transmitter of the 2

3. While the LED light on the transmitter is ON, press the

"Lock/Unlock" button on the transmitter, there will be 1 short chirp.

4. Turn the ignition OFF, there will be 3 long chirps to confirm exit of

transmitter programming mode.

Override Function—

The override function may be used if the remote transmitter is lost or

inoperative. To operate, enter the vehicle (alarm will sound), turn the

vehicles ignition to the ON position and push the valet/override switch until

the security system stops sounding. The security system is disarmed & reset.

Have your remote transmitter serviced or replaced.

Valet Function—

The Security System has a valet or stand-by mode that can be used when the

vehicle is being serviced or valet parked. To activate the valet, turn the

vehicles ignition to the "ON" position, then push and hold the valet/override

switch for 2 seconds or until the Security Systems LED turns ON solid. Turn

the vehicles ignition to the "OFF" position; your vehicle is now in valet

mode. To reactivate, repeat the above procedure noting the Security Systems

LED will now turn OFF.

ALARM FEATURES

car.