DCI C3210 Manual de instalação - Página 5

Procurar online ou descarregar pdf Manual de instalação para Compressor de ar DCI C3210. DCI C3210 17 páginas. C series

Clearance

Adequate clearance as shown below for servicing and air circulation — room

•

temperature should be maintained between 40°F and 100°F when the motors

are running.

A ﬂ at, level ﬂ oor that provides stable support.

•

Protection from the weather and direct sunlight.

•

A power source within 3 ft. of back-center that provides a dedicated,

•

breaker-protected circuit.

PLUMBING REQUIREMENTS

1. 1/2 in I.D. minimum pipe size.

2. Pipe connection is to be located within 3 ft of

center back of compressor.

3. Install per all Local and State plumbing codes.

WARNING!

Fire Hazard! Running motors generate heat. Do not store ﬂ ammable

liquids or objects such as clothing, mops, or brooms near or above the unit.

ELECTRICAL REQUIREMENTS

1. 3 wire single phase 115 vac or 230 vac. All

voltage ratings ± 5%.

2. Green Wire is to be grounded to a suitable

system ground.

3. Power supply must be on a dedicated circuit.

4. See data tag for appropriate breaker size.

5. Power supply connection is to be located

within 3 ft of center back of compressor.

6. Install per all local and State electrical codes.

1 .8 00.6 24.2 793

C Series Installation Guide

Site Requirements

Compressor Site Requirements

Site Requirements