2HEAT TC-300 Manual de início rápido - Página 2

Procurar online ou descarregar pdf Manual de início rápido para Termostato 2HEAT TC-300. 2HEAT TC-300 3 páginas. Programmable plug in thermostat

2HEAT TC-300 Manual de início rápido
Programmable Plug in Thermostat TC-300
Parameter Settings
Under off status, press "M" button and "+"button at the same time. You be able to enter the parameter settings. Each
press of "M" button can into next item setting.
No.
01
02
03
04
05
06
07
08
Mode Temperature Pre-set.
Pic.A
The Mode temperature can be set as the below following steps:
-
Press and hold the "M" button for around 3 seconds. The COMFORT mode (pic. A) display.
-
Change the mode temperature by the "+" or "-" buttons.
-
Press "M" button , the Energy-saving mode display (pic. B).
-
Change the mode temperature by the "+" or "-" buttons.
-
Press "M" button , the holiday mode display (pic. C).
-
Change the mode temperature by the "+" or "-" buttons.
The comfort function is displayed as a
The energy-saving function is displayed as a
The holiday function is displayed as a
To leave this menu, just wait 10 seconds or just push on the on/off button. The setup will be memorized
by the EEPROM (when this feature is enabled).
Item
Temp. Calibration
High Temp. Limit
Low Temp. Limit
Frost Protection
Dead Band
Heat pump protection
Eeprom( Memory)
Software Version
Pic.B
symbol (e.g. 25.5°C).
symbol (e.g. 20.5°C).
symbol (e.g. 10°C).
Range
-9 ~+9 'C
0 ~ 65 'C
0 ~ 65 'C
5 ~10 'C
0.5 ~2 'C
0: OFF 1: ON
0:OFF 1: ON
100C
Pic.C