autoright C900145 Manual - Página 6

Procurar online ou descarregar pdf Manual para Lixadeira autoright C900145. autoright C900145 16 páginas. Random orbital polisher

• There must be a foam pad on the base before using the polisher

• Do not apply pressure to the unit. The weight of the polisher is adequate to do the task

correctly

• Do not make adjustments to the polisher while it is in operation

• When the polisher is not in use, DO NOT set on base. Store the polisher in a "base-up"

position to prevent damage

• The most common error is applying too much wax

• Before you begin, make sure the work surface is clean and dry. If the work surface is a car,

remove road tar, excess grease spots, bugs, stains, and other surface problems with a

general cleaner before waxing or polishing

• Make sure the work surface is free of objects that could damage the pad

• Be sure to use a clean foam pad at the start of each project. Dirt and debris left on an old

pad may cause damage to the surface to be polished

• Always start and stop polisher on or against the surface of the car to prevent the pad from

flying off

• If the pad should come off the base, you may be using too much wax

• Do not wax a surface in direct sunlight

• Do not leave wax on a car or work surface for an extended time period

• Follow the recommendations provided with the wax manufacturer to avoid wax removal

problems and/or paint damage

Front Handle

Base

Foam Pad

ENGLISH

OPERATING INSTRUCTIONS

Trigger Locking

Button

Rear Handle

Trigger

Variable Control

Knob