autoright C900145 Manual - Página 7

Procurar online ou descarregar pdf Manual para Lixadeira autoright C900145. autoright C900145 16 páginas. Random orbital polisher

BUFFING

1. Pad is attached using hook and loop.

(Figure 1)

2. Pull the trigger and apply an even layer of

wax or polish using long strokes. Move the

polisher from front to back and side to side

as shown in Figure 2.

3. Remove the wax or polish in the same

order as it was applied, starting with a fresh,

clean pad.

4. DO NOT press down. Let the polisher

do the work. If the wax seems difficult

to polish, you may have applied too

much wax.

This polisher comes with a variable speed

trigger which allows you to control the speed

of the unit to achieve your desired polishing

finish. The deeper you pull the trigger, the

faster the polisher spins until it is up to full rpm.

The polisher also allows you to dial in six

specific speeds and lock them in place. The

variable control knob adjusts from low speed

(A) up to high speed (F). (Figure 3)

Once you adjust the control knob to your

preferred setting, pull the trigger and press the

trigger locking button on the side of the unit to

hold that speed. (Figure 4)

To disengage the locked trigger, simply pull

and release the trigger again and it will turn off.

OPERATING INSTRUCTIONS

Figure 1

Figure 2

Figure 3

Figure 4

ENGLISH