DCS DCS-C-24W Manual de cuidados e instalação - Página 5
Procurar online ou descarregar pdf Manual de cuidados e instalação para Placa de fogão DCS DCS-C-24W. DCS DCS-C-24W 17 páginas. Wok cooktop
Também para DCS DCS-C-24W: Manual de cuidados e instalação (18 páginas)
Imprimir página
CABINET PREPARATION
5. Establish the centerline of the cooktops desired
location. It should be the same as the center or
the overhead ventilation hood.
6. Cut the opening for the following installations:
* Standard countertop installations (See Fig.3).
* Deep counter or island installations (See Fig.4).
NOTE: If the deck is used, the sides or bottom of the
cutout may be solid combustible or non material. If
the bottom is solid, provide 5" x 5" cutout in the left
rear corner for the gas inlet and power cord clear-
ance.
If a solid side cabinet wall exists on one or both
sides, you will need to notch the front corner of the
cabinet to match the counter top notch and to allow
clearance for the cooktop front (See Fig.5).
FIG. 4
Island Installation
3/8"
9
1/16"
FIG. 3
Standard Installation
24"
Electrical and Gas
Supply.-(See Figs. 8,
9, 10, 11)
2 X 4 Corner Supports
3/8"
24
"
3/4
24"
4
Wok Front projects
outward from cabinets
(Typical of standard depth cabinetry)
Wok Front
Flush with cabinets
(Minimum of 25-3/8" cabinet depth req'd)
3/4" min.
22
"
11/16
Counter top backsplash
3/8"
23
"
11/16
777fig05
FIG. 5
777fig08