AFINIA LABEL L801 Substituição - Página 4

Procurar online ou descarregar pdf Substituição para Impressora AFINIA LABEL L801. AFINIA LABEL L801 4 páginas. Replacing microfiber roller

With these components accessible – isolate your Micro-Fiber Roller. Utilizing a small Phillip's head screw

driver. Loosen, but do not remove the screws, holding the plastic locking clips on the left and right side

of the Micro-Fiber Roller in place. After loosening these screws enough, the plastic locking clips should

release.

Figure 4. Loosening screws & unlocking latches holding Micro-Fiber Roller in place

After loosening the screws up and unlocking the plastic latches the Micro-Fiber Roller is accessible.

Remove the used Micro-Fiber Roller install the new Roller after locking the plastic latches back in place

and fasten the screws down.

Final Directions:

At this time the you have completed replacing the Micro-Fiber Roller. Assemble the service station

components back in the correct order. All that is left to do is connect the ribbon cable and return

the service tray back to the print engine.

Installment 1796