highwood Pottsville Manual de montagem - Página 3

Procurar online ou descarregar pdf Manual de montagem para Equipamento para relva e jardim highwood Pottsville. highwood Pottsville 4 páginas.

Step 4

Attach center post to ground stake

With the ground stake in place and the locking tabs set into

position slide Center post (B) over the stake as shown in Figure 4

below.

Note: Make sure to slide the post straight down so the locking

tabs touch the inside wall and properly engage in the corners of

the highwood

post as shown in Figure 5 below.

Fig. #4

Fig. #5

Step 5

Install metal ground stakes for end posts

Take each of the side sections (A) and hold them in the position

that they will be fitted to the center post. Double check and

carefully mark the end post (C) locations on the ground. Remove

side sections and install two ground stakes (F) for End posts (C)

following Steps 2, 3, and 4.

Step 6

Final post adjustment

Final adjustment may require you to twist the post and ground

stake so the three posts are positioned in the correct direction.

This rotation adjustment will not disrupt the ground attachment of

the stake.

Note: Ensure that the corner fence will be straight and in-line

when assembled.

Fig. #6