GALTRONICS 62-20-09 Instalação da antena - Página 2

Procurar online ou descarregar pdf Instalação da antena para Racks & Stands GALTRONICS 62-20-09. GALTRONICS 62-20-09 3 páginas. Top mounting bracket on pole for odas antennas

Imprimir página
Baylin TechnOlogies Company
7.5" (190.5mm)
ASSEMBLY INSTRUCTIONS
A.
Attach support bracket to pole
Drill required hole (Ø 1.1") through the
wooden pole (see drawing).
Attach the support bracket to the
wooden pole.
Our recommendation:
Use 1" threaded rods and corresponding 1"
plain washer, spring washers and 1" Nut as shown
in the drawings.
Tighten with a torque of 150Nm (1328 In*Lbs).
Choose threaded rod length according to
Table 1.1.
Table 1.1 - Threaded rod length
Pole diameter:
Threaded rod length:
Proprietary Information. All rights reserved. Galtronics reserves the right to modify or amend any antenna or specifi cation without prior notice.
7.8" (198.1mm)
6"
7"
(152mm)
(177mm)
(203mm)
9"
10"
(228mm)
(254mm)
Copyright © 2017 – Galtronics Corporation Ltd.
w w w . g a l t r o n i c s . c o m
Model No: 62-20-09 | Top Mounting Bracket on Pole for oDAS Antennas
20.5" (520.7mm)
11.6" (294.6mm)
8.5" (215.9mm)
8.5" (215.9mm)
8"
10"
9"
(254mm)
(228mm)
11"
12"
13"
(279mm)
(305mm)
(330mm)
4.3" (10.9mm)
6.9" (175mm)
12"
11"
(305mm)
(279mm)
15"
14"
(381mm)
(255mm)