Galvin Engineering Safe-Cell 50150 Manual de instalação do produto
Procurar online ou descarregar pdf Manual de instalação do produto para Produto de canalização Galvin Engineering Safe-Cell 50150. Galvin Engineering Safe-Cell 50150 4 páginas. Prison basin set
Imprimir página
®
Safe-Cell
Prison Basin Set
PRODUCT CODE:
- 50150
SPECIFICATIONS
The Safe-Cell
®
Timeflow Push Button Valve is used in prisons, detention centres, high risk institutions,
sporting facilities, schools and public area applications
Once activated, this timed flow product will allow water to flow for approximately 15 seconds*
Designed for easy bench installation (maximum thickness 10mm)
Time is based on set at 500kPa, 4LPM @ 22˚C. Time is affected by temperature, flow rate and pressure
Chrome plate finish
Note: This is a single temperature product, so if warm water is required this needs to be premixed prior to
reaching the valve. This can be done by using a CliniMix
IMPORTANT: All Safe-Cell
premises in good working order.
TECHNICAL DATA
Inlet
Outlet
Headwork
Working Pressure Range (kPa)
Maximum Working Temperature (°C)
Nominal Flow Rate (LPM)
Construction
Finish
NOTE: Galvin Engineering continually strive to improve their products. Specifications may change without
notice.
TOOLS REQUIRED
Power drill
Spanner or adjustable crescent
®
prison taps are tested in accordance with AS/NZS 3718 and leave our
Version 1, 30 August 2018, 1 of 4
®
Thermostatic Mixing Valve.
½" BSP – Male
Dome Outlet
Time flow cartridge
Min
100
Max
500
Min
5
Max
70
2.55
Brass
Chrome