AGS Merlin 1000SW+ Instalação, operação e manutenção - Página 7

Procurar online ou descarregar pdf Instalação, operação e manutenção para Controlador AGS Merlin 1000SW+. AGS Merlin 1000SW+ 12 páginas. Gas, electric & water isolation controller
Também para AGS Merlin 1000SW+: Manual de instalação e operação (16 páginas)

Imprimir página

Installation & Operation Manual

Merlin 1000SW+i

FAN SWITCHES (FS 1 / 2 / 3)

These terminals can be connected to a fan switch (supplied separately) which provide power to fans

when the emergency shut-off button is pressed.

Example of an AGS FS1 given.

CO2 MONITOR & 12VDC

Primarily this is used to power the AGS CO2-X but can be used as a power output for external auxiliary

devices when there is power at the panel and can be used to create a relay switch with the BMS relay

output. Max output: 50mA. If no CO2 monitor or other device is connected, the panel will 'beep' upon

power up and the CO2 LED will flash 3 times to indicate that this terminal has been disabled.

Rev: 15

08-22