AGS Merlin 1000SW+ Установка, эксплуатация и обслуживание - Страница 7
Просмотреть онлайн или скачать pdf Установка, эксплуатация и обслуживание для Контроллер AGS Merlin 1000SW+. AGS Merlin 1000SW+ 12 страниц. Gas, electric & water isolation controller
Также для AGS Merlin 1000SW+: Руководство по установке и эксплуатации (16 страниц)
Печатать страницу
Installation & Operation Manual
Merlin 1000SW+i
FAN SWITCHES (FS 1 / 2 / 3)
These terminals can be connected to a fan switch (supplied separately) which provide power to fans
when the emergency shut-off button is pressed.
Example of an AGS FS1 given.
CO2 MONITOR & 12VDC
Primarily this is used to power the AGS CO2-X but can be used as a power output for external auxiliary
devices when there is power at the panel and can be used to create a relay switch with the BMS relay
output. Max output: 50mA. If no CO2 monitor or other device is connected, the panel will 'beep' upon
power up and the CO2 LED will flash 3 times to indicate that this terminal has been disabled.
Rev: 15
08-22
7