Gambro Prisma System Instruções de calibração - Página 2

Procurar online ou descarregar pdf Instruções de calibração para Equipamento médico Gambro Prisma System. Gambro Prisma System 2 páginas. Scale diagnose and calibration procedures

Imprimir página

place either or both of the 2600-gram weights on the scale and monitor the

values. The reading should be + 7 grams for either weight.

CALIBRATE SCALES

Access Service Mode per procedure above

Press the Calibrate softkey to access calibration screens and procedures for scales,

pressure sensors, setting filter clotting limits, setting the real time clock/calendar, and

setting the PRISMA ID number (for a complete description of these screens, consult the

Prisma Service Manual, pages 5-4 through 5-10).

Press Scales softkey to access calibration screen for scales. Note that the softkeys

appear on the screen in the approximate location of each scale on the machine (i.e., the

dialysate scale is on the left side, effluent scale is in the middle, and the replacement

scale is on the right side of the machine).

Press the softkey for the scale you wish to calibrate. Verify that no weight is applied to the

selected scale.

The first screen will instruct the user to "place weight on selected scale. Use

weight of –100 to 100 grams". DO NOT place any weight on the selected scale.

Wait for the "Scale Stable" message to appear.

Press Next softkey

The second screen will instruct the user to "place weight on selected scale. Use

weight of 2500 grams to 2700 grams". Place one weight (2600 grams) on the

selected scale. Wait for the "Scale Stable" message to appear.

NOTE: Place weight on middle hook of selected scale to insure even distribution

of weight

Press Next softkey

The third calibration screen will appear and instruct the user to "place weight on

selected scale. Use weight of 5100 grams to 5300 grams". Place both Prisma

weights on selected scale. Wait for "Scale Stable" message to appear.

NOTE: Place weights on outer hooks of selected scale to insure even distribution

of weight

Press Store softkey

Now that the selected scale is calibrated, the Service-Scales Calibrate screen returns to

the Service Scales screen. Remove the weights and calibrate any of the other scales

using this same procedure.

When scale calibrations are complete, press Exit softkey until the main Service screen

appears. Repeat DIAGNOSE SCALES to insure all scales are in calibration.

Press Exit softkey until main Service screen appears. Press Restart softkey to restart the

Prisma System. The machine will enter Setup Mode, Choose Patient screen.

CLINICAL ASSISTANCE SERVICE

Available 24 hours/day, including weekends and holidays

Call if further assistance is required

Reference:

Gambro Renal Products, Inc. Prisma System Service Manual, 1999, Chapter 5, pages 5-1

through 5-13.

10810 West Collins Avenue

Lakewood, CO 80215-4434

800-525-2623 or 303-232-6800

www.usa-gambro.com

2002 Gambro Renal Products, Inc. P/N 306100068 Rev A