AGT INDUSTRIAL AGT-RC72 Manual do produto - Página 12
Procurar online ou descarregar pdf Manual do produto para Cortador de escova AGT INDUSTRIAL AGT-RC72. AGT INDUSTRIAL AGT-RC72 19 páginas. Skid steer brush cutter
Imprimir páginaHandling safety
Maintenance Schedule
This brush cutter attachment will provide years of dependable service if routine maintenance procedures
are performed. The maintenance tasks listed below are based on normal operating conditions. More
frequent maintenance may be necessary with intense use or when operating in adverse environmental
conditions.
MAINTENANCE TASK
Check skid steer loader hydraulic fluid level. Add
fluid as necessary.
Check that all fasteners (nuts, bolts,, washers, pins,
keepers) are in place. Tighten as necessary.
Inspect and replace any worn, torn, or missing safety
decals.
Inspect hydraulic plumbing (hoses and connectors)
for damage or leakage. Repair or replace hydraulic
items as necessary.
Check condition of cutter blades. Sharpen or replace
as necessary.
Check oil level in bearing housing. Add fluid as
necessary.
Change oil in bearing housing. * Change oil after 50
hours of first time use, then every 1000 hrs or yearly.
Wash Brush Cutter
Check brush cutter for major scratches and dings.
Sand and repaint these areas to prevent rust damage.
*Use a paint formulated for farm equipment which
can be found at your local hardware store.
Lubricate all pivot joints.
BEFORE EACH
USE
√
√
√
√
WEEKLY
WEEKLY
√
√
√
√
√
√
√