Game Group SandPRO 4516 Manual do Proprietário - Página 10
Procurar online ou descarregar pdf Manual do Proprietário para Filtro de piscina Game Group SandPRO 4516. Game Group SandPRO 4516 18 páginas. 25 pool filter system
Imprimir página7.
CONNECTING THE FILTER SYSTEM
The next section outlines installation instructions for connecting the Pool Filter System to your pool. Since the hoses utilized
for filtration and return lines differ for various types of above-ground pools, the pool-filter connection section is broken down
by pool hose size and type. For pools with 1¼" or 1½" diameter unthreaded hoses, see "A" below. For pools with 2¼" threaded
hose connectors, see "B" on following page.
Before you begin to connect hoses to the filter and pump, make certain that no water can flow through the intake or return hoses connected to
the pool. Some pools have shut off valves in their intake and return ports, others do not. If you do not have a shut off valve, block the ports with
A. For Pools with 1¼" or 1½ "Diameter Unthreaded Hoses
These instructions assume that the pool is already assembled with hoses attached to the water intake and return ports on the pool.
1. Adapter Installation
a. Screw the 1¼" – 1½" hose connector into the transparent hair & lint strainer cover.
Make certain that O-Ring C (1½" dia) is in place before securing.
2. Pool "Skimmer Hose" Attachment
a. Attach the hose coming from your pool's skimmer (outlet of pool) to the 1¼" – 1½"
hose connector extending from the hair & lint strainer cover.
b. Secure with a hose clamp.
3. Pool "Return Hose" Attachment
a. Attach the pool return hose (inlet of pool) to the pool return port on the tank cover.
Note: Be sure not to secure the return hose to the waste/backwash port.
c. Secure with a hose clamp.
Ensure that all HOSE connections are tight and that the hoses are NOT kinked or bent at severe angles.
4. Completed Filter-Pump Installation should resemble the figure shown at right.
SAVE THESE INSTRUCTIONS
a removable plug to prevent water from passing into and through the hoses.
IMPORTANT
STOP
10
Hose Connector
From Pump
To Pool
To Pool
Return
From Pool
Skimmer
Backwash
Port